More Filters
Hobart Dough Mixer Wire Wisk: Used on a 60 quart dough mixer bowl, 18-1/2" long, 8-1/2" wide. Genuine Hobart Accessory Part. Four Available, used, $75.00 each, no haggle price, in Escondido, call (760)746-7209
Hobart Dough Mixer Pastry Dough Knife: Used on a 60 quart & a 80 quart dough mixer, 23-1/2" long, 13" wide & base mount is 8-1/2" wide. The Hobart pastry knife cuts through thick dough to easily combine ingredients. Ideal for mixing pastry & pie dough, used to cut butter into flour, used at slow & medium speeds. Genuine Hobart Accessory Part. $150., no haggle price, in Escondido, call (760...
Hobart Dough Mixer Spiral Dough Hook: For a 140 quart dough mixer bowl and should also fit an 80 quart dough mixer bowl. 26-3/4" long, 10" diameter base. Best for pizza dough and other heavy doughs. Genuine Hobart Accessory Part, used, $150.00, no haggle price, in Escondido, call (760)746-7209
Hobart Dough Mixer Flat Beater Paddle: For a 140 quart Hobart dough mixer bowl & should also fit an 80 quart dough mixer bowl. 26" long, 16-1/2" wide. Genuine Hobart Accessory Part, used, $95.00. no haggle price, in Escondido, call (760)746-7209
Hobart Dough Mixer Flat Beater Paddle: For an 80 Quart Dough Mixer Bowl, 19-1/2" long, 13-1/2" wide, Genuine Hobart Accessory Part. Used, $90.00, no haggle price, in Escondido, call (760)746-7209
Hobart Dough Mixer Flat Beater Paddle: Used on a 60 quart Hobart dough mixer bowl, 16-1/2" long, 10" wide. Genuine Hobart Accessory Part. Used, $80.00, no haggle price, in Escondido, call (760)746-7209
this weekEscondido, CA+12 milesFor SaleOfferedReport Listing
Polycrystalline Diamond Cutters: The cutters are man made, they have the hardness of a real diamond. They are used on concrete floor polishing machines, in the oil and gas industry in the drill bits and for water well drilling bits. The size that I am selling is 1308, they are 13 MM diameter by 8 MM thick. I am selling in a set of 50, I am not interested in selling them seperately. $750., ...
this weekEscondido, CA+12 milesFor SaleOfferedReport Listing
Cutting-Hardfacing Composite Rod Material for well drilling bits, coring bits, augers and can be used for hardfacing and wear resistance. The rod consists of tungsten particles mixed in a brazing matrix and is applied on metal with an oxy-acetylene torch. The rods are 14" long x 1/2" wide. Selling the ten rods for $200., no haggle price. I am not interested in selling the rods seperately. ...
Power Supply: Manufactured by A & M Instruments, SPS 1524, part number: SM-A-742458, the power supplies have a rebuilt sticker on them. I have ten power supplies. Buy one for $140., or buy all ten for only $950., they weigh about 45 pounds each. In Escondido, call (760)746-7209
this weekEscondido, CA+12 milesFor SaleOfferedReport Listing
Military Engine Electronic Ignition System Upgrade Kit: Used to upgrade a point type ignition system to an electronic ignition system. Used on a four cylinder, six horsepower Military Standard Engine Model 4A032. 36 items in the upgrade kit. Purchased new, never installed. Selling the kit for $75., no haggle price. In Escondido, call (760)746-7209
this weekEscondido, CA+12 milesFor SaleOfferedReport Listing
Basler VR63-4 Voltage Regulator: This is a replacement voltage regulator that can be used on many different generator sets. Purchased new, never installed, selling for $300., no haggle price. In Escondido, call (760)746-7209
Detroit Diesel 8V-92TA Diesel Engine: 435 horsepower, manufactured in 1979, the engine has been sitting several years and will probably need to be rebuilt, it does not turn over. No starter, selling for $950., I will not haggle on the price. In Escondido, call (760)746-7209
this weekEscondido, CA+12 milesFor SaleOfferedReport Listing
Parker Variable Volume Hydraulic Pump: The identification numbers are: PAVC65B2RM13, 65CC/REV, CW rotation, K15H085, 3000 PSI Max. The pump weighs about 75 pounds. The pump has been sitting for several years, it does not turn over. It is a rebuildable pump, This type of pump is used on concrete pumps, forklifts and many other hydraulic applications. The cost of the pump new is $2,000., I a...
Hamilton 1922 Living Room Grand Piano: Built by Baldwin, Serial Number: 105301. The footprint area is 58" wide x 57" deep. The case is Mahogany, it has some scratches, nicks and marks on it. One of the keys has a small chip broken off. It has been several years since it was tuned and will need tuning after it is moved. The piano has been appraised at $5,850., selling for $2,600. In Escon...
Slotformer Model SF12: High pressure laminate forming equipment. The Slotformer is the quickest, easiest and least expensive method of obtaining a full wrap around. You can bend all formable high pressure laminates from thicker counter top materials to the thinner cabinet and surfacing materials as well as real wood veneers. Ninety degree bends, no drip edges and a multitude of other shapes can...
Oscilloscopes: Three Units, Hickok Electrical Instruments Company, Model 5000A, Serial Number: 432-00057. They are used and not tested, I do not have the probes. Selling for $150., no haggle price. Selling in a lot of three, I am not selling them seperately, local pickup only - I will not ship them. In Escondido, call (760)746-7209
Jaguar Wheels: Three original X-Type Jaguar Wheels, (7.5JX16CHX60.0) 2R83-1007-KA, made in Hungary. I only have three wheels, the fourth wheel was damaged by hitting a curb. Selling the three wheels for $225., no haggle price, local pickup only - I will not ship the wheels. In Escondido, call (760)746-7209
this weekEscondido, CA+12 milesFor SaleOfferedReport Listing
Industrial Engine Cooling System Preheater: This unit is a diesel fired boiler that gets plumbed into the coolant lines of a diesel engine. It was originally designed to be used on generator sets to keep the engine coolant warm in cold weather conditions for quick full electrical load startup. It can be used on many different diesel engine applications. Operates on 24 volts DC, 30,000 BTU/H...
Power Take Off Winch: The winch was on a 2-1/2 Ton Military Truck. It has about 250' of 1/2" steel cable. This type of winch requires a power take off on the vehicle that it will be mounted on or it can be powered by a hydraulic motor. Selling for $750., no haggle price, local pickup only, I will not ship the winch. In Escondido, call (760)746-7209
Your Listing Here